Welding Materials
INVENTORY LIST
E(R)NiCrMo-3
Specifications
ASME Section IX, F-No.43
AMS 5837
UNS N06625 ISO
SNi6625
MIL-E-21562 Types MIL-RN625, MIL-EN625
Europe NiCr22Mo9Nb
| Element | Composition |
|---|---|
| Ni+Co | 58.0 min |
| Al | 0.40 max |
| C | 0.10 max |
| Cr | 20.0-23.0 |
| Mn | 0.50 max |
| Ti | 0.40 max |
| Fe | 5.0 max |
| Nb+Ta | 3.15-4.15 |
| S | 0.015 max |
| P | 0.02 max |
| Cu | 0.50 max |
| Mo | 8.0-10.0 |
| Si | 0.50 max |
| Others | 0.50 max |
Minimum Tensile Strength, psi: 105,000
Performance:
MPa: 724
Elongation, (4d): 30%
The welding wire can be supplied in spools or straight lengths, with several different diameters available for selection, as shown in the table below:
| Diameter (mm) | 0.8 | 0.9 | 1.0 | 1.14 | 1.2 | 1.6 | 2.4 | 3.2 |
|---|---|---|---|---|---|---|---|---|
| Diameter (in) | 0.030 | 0.035 | 0.040 | 0.045 | 0.047 | 0.062 | 0.093 | 0.125 |
Note: The information provided in this material represents typical products and their performance by the company, and is not a technical specification of the product. INCONEL, MONEL, INCOLOY, INCO-WELD, INCOFLUX, INCO-CORED, NI-ROD, 686CPT, and 725NDUR are registered trademarks of SMC International Alloy Group.
INCONEL 112 Welding Rod
INCONEL 112 welding rod is used for manual arc welding of INCONEL 625, INCOLOY 825/25-6MO alloys, and other molybdenum-containing stainless steels. It can also be used for surface overlay welding of steels and welding of various corrosion-resistant alloys such as 20 corrosion-resistant alloys. The weld metal formed by this welding rod has high strength and strong corrosion resistance at room temperature and high temperatures, including resistance to pitting, crevice corrosion, and stress corrosion cracking in sulfuric acid media. INCONEL 112 welding rod can be used for welding dissimilar metals, including INCONEL series alloys, INCOLOY series alloys, stainless steels, low-alloy steels, and carbon steels. INCONEL 112 welding rod should be used with direct current (DC+) and is suitable for all-position welding.
Specifications
AWS A5.11, ENiCrMo-3
DIN 1736 EL-NiCr20Mo9Nb
ASME Section II, SFA 5.11, ENiCrMo-3
Werkstoff Nr.2.4621
ISO ENi6625
MIL-E-22200/3 Type MIL-IN12
Europe ENiCr22Mo9Nb
UNS W86112
| Element | Composition |
|---|---|
| Ni+Co | 55.0 min |
| Mo | 8.0-10.0 |
| C | 0.10 max |
| Cr | 20.0-23.0 |
| Mn | 1.0 max |
| Si | 0.75 max |
| Fe | 7.0 max |
| Nb+Ta | 3.15-4.15 |
| S | 0.02 max |
| P | 0.03 max |
| Cu | 0.50 max |
| Others | 0.50 max |
Minimum Tensile Strength, psi: 110,000
Performance:
MPa: 758
Elongation, (4d): 30%
Product Supply Status
| Diameter (mm) | 2.4 | 3.2 | 4.0 | 4.8 |
|---|---|---|---|---|
| Diameter (in) | 3/32 | 1/8 | 5/32 | 3/16 |
| Length (mm) | 229 | 356 | 356 | 356 |
| Length (in) | 9 | 14 | 14 | 14 |
| Current (A) | 40-65 | 65-90 | 90-125 | 125-160 |
Note: The information provided in this material represents typical products and their performance by the company, and is not a technical specification of the product. INCONEL, MONEL, INCOLOY, INCO-WELD, INCOFLUX, INCO-CORED, NI-ROD, 686CPT, and 725NDUR are registered trademarks of SMC International Alloy Group.