Welding Materials
INVENTORY LIST
ERNiCrMo-10 ENiCrMo-10
INCO-WELD 622 wire is primarily used for metal inert gas (MIG) welding or tungsten inert gas (TIG) welding of INCONEL 622/625 alloy and INCOLOY 25-6MO/825 alloy. Due to the excellent resistance of the weld metal to preferential corrosion, it is also widely used in welding molybdenum-containing stainless steel, INCONEL C-276 alloy, and INCONEL 625 alloy. The high chromium and molybdenum content also give this material excellent resistance to pitting and crevice corrosion. INCO-WELD 622 wire has a wide range of applications and can be used for welding dissimilar materials, such as INCONEL series alloys, INCOLOY series alloys, carbon steel, low-alloy steel, and stainless steel.
Specifications:
AWS A5.14 ERNiCrMo-10
ASME II, SFA-5.14, ERNiCrMo-10
ISO SNi6022
ASME IX, F-No.44
Europe NiCr21Mo13Fe4W3
UNS N86022
Chemical Composition:
Ni: Remaining
Cu: 0.50 max
C: 0.015 max
Co: 2.5 max
Mn: 0.50 max
Cr: 20.0-22.5
Fe: 2.0-6.0
Mo: 12.5-14.5
P: 0.02 max
V: 0.35 max
S: 0.02 max
W: 2.5-4.5
Si: 0.08 max
Others: 0.50 max
Performance:
Minimum Tensile Strength: 115,000 psi (793 MPa)
Elongation (4d): 40%
Hardness, HRB: 100
Wire Specifications:
| Diameter (mm) | Diameter (in) |
|---|---|
| 0.8 | 0.030 |
| 0.9 | 0.035 |
| 1.0 | 0.040 |
| 1.14 | 0.045 |
| 1.2 | 0.047 |
| 1.6 | 0.062 |
| 2.4 | 0.093 |
| 3.2 | 0.125 |
INCONEL 122
Description:
INCONEL 122 welding rod is mainly used for manual arc welding of INCONEL 622/625 alloys and INCOLOY 25-6MO/825 alloys. This is a high-performance welding rod that can be used for dissimilar material joint welding. When used for welding molybdenum-containing stainless steel, INCONEL C-276 alloy, and INCONEL 625 alloy, it exhibits excellent performance in preventing preferential corrosion of the weld. INCONEL 122 welding rod can be widely used in industries such as chemical, energy, petroleum, and maritime. INCONEL 122 welding rod is suitable for all-position welding and should be used with direct current reverse polarity.
Specifications:
AWS A5.11 ENiCrMo-10
ASME II, SFA-5.11, ENiCrMo-10
ISO SNi6022
ASME IX, F-No.44
Europe NiCr21Mo13Fe4W3
UNS N86022
Chemical Composition:
Ni: Remaining
Cu: 0.50 max
C: 0.02 max
Co: 2.5 max
Mn: 0.50 max
Cr: 20.0-22.5
Fe: 2.0-6.0
Mo: 12.5-14.5
P: 0.03 max
V: 0.35 max
S: 0.15 max
W: 2.5-3.5
Si: 0.2 max
Others: 0.50 max
Performance:
Minimum Tensile Strength: 110,000 psi (690 MPa)
Elongation (4d): 25%
Product Supply Status:
| Diameter (mm) | Diameter (in) | Length (mm) | Length (in) | Current (A) |
|---|---|---|---|---|
| 2.4 | 3/32 | 229 | 9 | 40-65 |
| 3.2 | 1/8 | 356 | 14 | 75-100 |
| 4.0 | 5/32 | 356 | 14 | 80-140 |
| 4.8 | 3/16 | 356 | 14 | 125-150 |
Note: The information provided here is for typical products and their performance by our company and not a technical specification of the product. INCONEL, MONEL, INCOLOY, INCO-WELD, INCOFLUX, INCO-CORED, NI-ROD, 686CPT, and 725NDUR are registered trademarks of SMC International, a welding product company in the superalloy group.
φ1.0/1.2/2.4/3.2/4.0