Welding Materials
INVENTORY LIST
ERNiCrMo-4 ENiCrMo-4
INCO-WELD C-276 wire is primarily used for tungsten inert gas (TIG) welding and metal inert gas (MIG) welding of INCONEL C276 alloy and other nickel-chromium-molybdenum alloys, and can also be used for surface cladding of steel. This welding material exhibits excellent corrosion resistance in various corrosive media, particularly in resisting pitting and crevice corrosion. This wire can be used for dissimilar material welding, including welding of INCONEL C276 alloy with other nickel alloys, stainless steel, and low-alloy steel.
AWS A5.14, ERNiCrMo-4
Werkstoff Nr.2.4886
ASME II, SFA-5.14, ERNiCrMo-4
UNS N10276
Specification: ASME IX, F-No.44
ISO SNi6276
EuropeNiCrMo16Fe6W4
Chemical Composition:
Ni: Remainder
Cu: 0.50 max
C: 0.02 max
Co: 20.0-23.0
Mn: 1.0 max
Cr: 14.5-16.5
Fe: 4.0-7.0
Mo: 15.0-17.0
P: 0.04 max
V: 0.35 max
S: 0.03 max
Si: 0.08 max
Others: 0.50 max
Performance:
Minimum Tensile Strength, psi: 100,000
MPa: 690
Elongation (4d), %: 30
The wire can be supplied in spools or straight lengths, and is available in various diameters, as shown in the table below:
| Diameter (mm) | Diameter (in) |
|---|---|
| 0.8 | 0.030 |
| 0.9 | 0.035 |
| 1.0 | 0.040 |
| 1.14 | 0.045 |
| 1.2 | 0.047 |
| 1.6 | 0.062 |
| 2.4 | 0.093 |
| 3.2 | 0.125 |
Note: The information provided here is for typical products and their performance by our company, and not a technical specification of the product. INCONEL, MONEL, INCOLOY, INCO-WELD, INCOFLUX, INCO-CORED, NI-ROD, 686CPT, and 725NDUR are registered trademarks of Special Metals Corporation International, Welding Products Company.
φ1.0/1.2/2.4/3.2/4.0